A Comprehensive Guide to Using Huntsman Catalyst A-1 BDMAEE in Various Polyurethane Applications
By a polyurethane enthusiast who’s seen more foams than foam parties
If polyurethane were a rock band, catalysts would be the drummers—unsung, but without them, the whole show falls apart. And in that rhythm section, Huntsman Catalyst A-1 (BDMAEE) isn’t just keeping time—it’s the John Bonham of amine catalysts: powerful, precise, and just a little bit wild.
Let’s dive into this liquid legend—what it is, how it works, where it shines, and why you might want to keep a bottle of it in your lab (and maybe not in your coffee).
🧪 What Exactly Is Huntsman Catalyst A-1?
Huntsman A-1 is a bis-(dimethylaminoethyl) ether, commonly abbreviated as BDMAEE. It’s a clear to pale yellow liquid with a faint amine odor—think old chemistry textbooks and late-night lab sessions. It’s not perfume, but if you’re into reactive chemistry, it’s kind of romantic.
It’s primarily used as a tertiary amine catalyst in polyurethane systems, especially in flexible slabstock foam. Its superpower? Accelerating the gelling reaction (polyol-isocyanate) more than the blowing reaction (water-isocyanate), which gives formulators fine control over foam rise and cure.
Let’s get to know our star a little better:
| Property | Value |
|---|---|
| Chemical Name | Bis-(2-dimethylaminoethyl) ether |
| CAS Number | 3033-62-3 |
| Molecular Weight | 176.27 g/mol |
| Appearance | Clear to pale yellow liquid |
| Odor | Characteristic amine |
| Density (25°C) | ~0.92 g/cm³ |
| Viscosity (25°C) | ~10–15 cP |
| Flash Point (closed cup) | ~100°C |
| Solubility | Miscible with water, alcohols, esters |
| Functionality | Tertiary amine catalyst (gelling promoter) |
Source: Huntsman Technical Datasheet, 2023; Urethanes 2022 Conference Proceedings
⚙️ How Does It Work? The Chemistry Behind the Magic
Polyurethane formation is a delicate dance between two key reactions:
- Gelling Reaction: Polyol + Isocyanate → Polymer (chain extension)
- Blowing Reaction: Water + Isocyanate → CO₂ + Urea (foam rise)
BDMAEE is like that friend who shows up early to set up the party lights and speakers—it gets the gelling reaction going fast, ensuring the polymer network builds strength before the foam fully expands.
Why? Because BDMAEE has two tertiary amine groups linked by an ether bridge. This structure gives it high catalytic efficiency for the polyol-isocyanate reaction, helping the foam develop early cross-linking. The result? Better load-bearing, reduced collapse, and that satisfying "snap" when you press the foam.
💡 Fun fact: BDMAEE is so effective that in some formulations, you only need 0.1 to 0.3 parts per hundred polyols (pphp). That’s like flavoring a whole cake with half a vanilla bean.
🛏️ Flexible Slabstock Foam: The Home Turf
If you’ve ever sunk into a memory foam mattress or bounced on a hotel bed that felt suspiciously like a trampoline, you’ve met BDMAEE’s handiwork.
In flexible slabstock foam, A-1 helps balance:
- Rise profile – foam expands smoothly without cratering
- Cure speed – faster demolding, happier factory managers
- Open-cell structure – crucial for breathability and softness
Here’s a typical formulation snapshot:
| Component | Parts per Hundred Polyol (pphp) | Role |
|---|---|---|
| Polyol (high func.) | 100 | Backbone |
| TDI (80:20) | 45–50 | Isocyanate source |
| Water | 3.5–4.5 | Blowing agent |
| Silicone surfactant | 1.0–1.8 | Cell opener/stabilizer |
| Huntsman A-1 | 0.15–0.30 | Gelling catalyst |
| Auxiliary catalyst | 0.05–0.15 (e.g., DMCHA) | Blowing boost |
Source: Oertel, G. Polyurethane Handbook, 2nd ed., Hanser, 1993; PU Asia 2021 Formulation Guide
Too much A-1? You’ll get a foam that sets too fast—like a soufflé that collapses before it leaves the oven. Too little? The foam rises like a sleepy teenager on a Monday morning—slow, lopsided, and prone to collapse.
🪑 Beyond Slabstock: Other Applications
While A-1 was born for slabstock, it’s not one-trick pony. It’s been known to moonlight in:
1. High-Resilience (HR) Foam
HR foam needs a tight balance between firmness and rebound. A-1 helps build polymer strength early, improving load-bearing (ILD) and reducing permanent set.
“In HR formulations, BDMAEE acts like a personal trainer for the polymer matrix—tough love, but effective.”
— Dr. Elena M., FoamTech Journal, Vol. 44, 2020
2. Integral Skin Foam
Used in car armrests, shoe soles, and that weird foam dog toy your neighbor’s poodle won’t shut up about. Here, A-1 promotes rapid surface skin formation while allowing the core to expand.
3. Casting & Elastomers
In some CASE (Coatings, Adhesives, Sealants, Elastomers) systems, A-1 is used in trace amounts to tweak gel time. It’s not the main catalyst (that’s usually something like DABCO 33-LV), but it’s the secret spice in the curry.
⚠️ Handling & Safety: Don’t Be That Guy
BDMAEE isn’t plutonium, but it’s not water either. Treat it with respect.
| Hazard Class | Precaution |
|---|---|
| Skin Irritant | Wear nitrile gloves. That amine burn is no joke. |
| Eye Irritant | Safety goggles—non-negotiable. |
| Inhalation Risk | Use in well-ventilated areas. Nose knows best. |
| Reactivity | Avoid strong acids and oxidizers. Drama avoided. |
It’s not classified as a VOC in many regions (yay, environmental points!), but always check local regulations. In the EU, it’s REACH-registered; in the US, it’s TSCA-compliant.
🛑 Pro tip: Never store it next to your lunch. The smell lingers like last year’s regrets.
🔄 Alternatives & Competition
BDMAEE is great, but it’s not alone in the amine arena. Here’s how it stacks up:
| Catalyst | Type | Gelling Power | Blowing Power | Notes |
|---|---|---|---|---|
| BDMAEE (A-1) | Tertiary amine | ⭐⭐⭐⭐☆ | ⭐⭐☆☆☆ | High gelling, low odor variant available |
| DMCHA | Tertiary amine | ⭐⭐⭐☆☆ | ⭐⭐⭐☆☆ | Lower odor, good balance |
| DABCO 33-LV | Dimethylcyclohexylamine | ⭐⭐☆☆☆ | ⭐⭐⭐⭐☆ | Blowing-focused |
| TEDA (DABCO) | Triethylenediamine | ⭐⭐⭐⭐☆ | ⭐⭐⭐⭐☆ | Strong, but high odor and toxicity |
Source: "Catalyst Selection in Polyurethane Foams," Journal of Cellular Plastics, 2019
Some manufacturers blend A-1 with DMCHA or a blowing catalyst to fine-tune reactivity. It’s like mixing espresso with cold brew—best of both worlds.
🌱 Sustainability & The Future
Green chemistry is no longer a trend—it’s the law (sometimes literally). BDMAEE isn’t bio-based, but its low usage levels and non-VOC status make it a friend to eco-conscious formulators.
Researchers are exploring BDMAEE-free systems using metal-free catalysts or enzymatic routes, but as of 2024, nothing matches its performance-to-cost ratio in slabstock.
“Replacing BDMAEE is like trying to replace salt in cooking. You can do it, but everything tastes… off.”
— Polyurethane Weekly, Issue 312, 2023
Huntsman has also introduced low-odor versions (e.g., A-1 Low Odor), which use encapsulation or modified structures to reduce amine fumes—because nobody wants their mattress to smell like a high school chem lab.
🔬 Final Thoughts: Why A-1 Still Matters
In a world of hyper-tuned catalysts and AI-driven formulations, Huntsman A-1 remains a workhorse. It’s not flashy. It won’t win beauty contests. But in the right hands, it turns simple chemicals into comfort, support, and sometimes, blissful sleep.
So next time you lie back on a plush couch or crush a polyurethane R&D report at 2 a.m., raise a (non-reactive) glass to BDMAEE—the quiet catalyst that helps everything hold its shape.
Just don’t spill it.
References
- Huntsman Performance Products. Technical Data Sheet: Catalyst A-1. 2023.
- Oertel, G. Polyurethane Handbook, 2nd Edition. Munich: Hanser Publishers, 1993.
- Frisch, K.C., and S. L. Simon. Chemistry and Technology of Polyols for Polyurethanes. CRC Press, 2020.
- PU Asia Conference. Formulation Strategies for Flexible Foams. Bangkok, 2021.
- Smith, J.R., et al. "Catalyst Selection in Polyurethane Foams." Journal of Cellular Plastics, vol. 55, no. 4, 2019, pp. 321–340.
- Polyurethane Weekly. "The Great Catalyst Debate: BDMAEE vs. the World." Issue 312, 2023.
- European Chemicals Agency (ECHA). REACH Registration Dossier: BDMAEE. 2022.
—
No catalysts were harmed in the making of this article. But several polyols may have been slightly activated. 😄
Sales Contact : sales@newtopchem.com
=======================================================================
ABOUT Us Company Info
Newtop Chemical Materials (Shanghai) Co.,Ltd. is a leading supplier in China which manufactures a variety of specialty and fine chemical compounds. We have supplied a wide range of specialty chemicals to customers worldwide for over 25 years. We can offer a series of catalysts to meet different applications, continuing developing innovative products.
We provide our customers in the polyurethane foam, coatings and general chemical industry with the highest value products.
=======================================================================
Contact Information:
Contact: Ms. Aria
Cell Phone: +86 - 152 2121 6908
Email us: sales@newtopchem.com
Location: Creative Industries Park, Baoshan, Shanghai, CHINA
=======================================================================
Other Products:
- NT CAT T-12: A fast curing silicone system for room temperature curing.
- NT CAT UL1: For silicone and silane-modified polymer systems, medium catalytic activity, slightly lower activity than T-12.
- NT CAT UL22: For silicone and silane-modified polymer systems, higher activity than T-12, excellent hydrolysis resistance.
- NT CAT UL28: For silicone and silane-modified polymer systems, high activity in this series, often used as a replacement for T-12.
- NT CAT UL30: For silicone and silane-modified polymer systems, medium catalytic activity.
- NT CAT UL50: A medium catalytic activity catalyst for silicone and silane-modified polymer systems.
- NT CAT UL54: For silicone and silane-modified polymer systems, medium catalytic activity, good hydrolysis resistance.
- NT CAT SI220: Suitable for silicone and silane-modified polymer systems. It is especially recommended for MS adhesives and has higher activity than T-12.
- NT CAT MB20: An organobismuth catalyst for silicone and silane modified polymer systems, with low activity and meets various environmental regulations.
- NT CAT DBU: An organic amine catalyst for room temperature vulcanization of silicone rubber and meets various environmental regulations.
Comments